Power E › runs › Well Pump (1/2 HP)

Can a Mango Power Power E run a well pump (1/2 hp)?

Yes — the Mango Power Power E runs a well pump (1/2 hp).
The well pump (1/2 hp) draws about 1,000 W running, with a 2,100 W startup surge; the Power E delivers 3,000 W continuous and 4,800 W surge. Its 3,506 Wh battery runs one for about 21 h.

1,000 WWell Pump (1/2 HP) running

3,000 WPower E continuous

~21 hruntime

3,506 WhPower E capacity

Check the Power E at Amazon → Full specs

🔗 Brand-direct affiliate link. We earn a commission when you buy through it — at no extra cost to you.

The check
Continuous: 3,000 W ≥ 1,000 W needed → ok
Surge: 4,800 W ≥ 2,100 W needed → ok
Runtime: 3,506 Wh × 90% ÷ 150 W avg = ~21 h

Bigger units that run it longer

Bluetti Pioneer Na

900 Wh · 1,500 W cont

~5.4 h

Goal Zero Yeti 1000X

983 Wh · 1,500 W cont

~5.9 h

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~5.9 h

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~6.1 h

EcoFlow DELTA 3 Plus

1,024 Wh · 1,800 W cont

~6.1 h

Bluetti Elite 100 V2

1,024 Wh · 1,800 W cont

~6.1 h

Anker SOLIX C1000 Gen 2

1,024 Wh · 2,000 W cont

~6.1 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~6.3 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~6.4 h

Common questions

Can the Mango Power Power E run a well pump (1/2 hp)?

Yes. A well pump (1/2 hp) draws about 1,000 W with a 2,100 W startup surge, and the Mango Power Power E delivers 3,000 W continuously with a 4,800 W surge rating — comfortably enough. On its 3,506 Wh battery it runs one for roughly 21 h (the load cycles ~15% of the time, so it lasts longer than raw watts suggest).

Sources: Well Pump (1/2 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); Power E specs — manufacturer published specifications (compiled 2026-10-05; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.