Yeti 700 › runs › Sump Pump (1/3 HP)

Can a Goal Zero Yeti 700 run a sump pump (1/3 hp)?

Yes — the Goal Zero Yeti 700 runs a sump pump (1/3 hp).
The sump pump (1/3 hp) draws about 800 W running, with a 1,500 W startup surge; the Yeti 700 delivers 1,000 W continuous and 1,500 W surge. Its 677 Wh battery runs one for about 3.8 h.

800 WSump Pump (1/3 HP) running

1,000 WYeti 700 continuous

~3.8 hruntime

677 WhYeti 700 capacity

Check the Yeti 700 at Goal Zero → Full specs

🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.

The check
Continuous: 1,000 W ≥ 800 W needed → ok
Surge: 1,500 W ≥ 1,500 W needed → ok
Runtime: 677 Wh × 90% ÷ 160 W avg = ~3.8 h

Bigger units that run it longer

768 Wh · 1,000 W cont

~4.3 h

Anker SOLIX C800

768 Wh · 1,200 W cont

~4.3 h

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~5.5 h

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~5.8 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~5.9 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~6.0 h

Bluetti AC180

1,152 Wh · 1,800 W cont

~6.5 h

Jackery Explorer 1000 Plus

1,264 Wh · 2,000 W cont

~7.1 h

Common questions

Can the Goal Zero Yeti 700 run a sump pump (1/3 hp)?

Yes. A sump pump (1/3 hp) draws about 800 W with a 1,500 W startup surge, and the Goal Zero Yeti 700 delivers 1,000 W continuously with a 1,500 W surge rating — comfortably enough. On its 677 Wh battery it runs one for roughly 3.8 h (the load cycles ~20% of the time, so it lasts longer than raw watts suggest).

Sources: Sump Pump (1/3 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); Yeti 700 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.