Elite 300 › runs › Sump Pump (1/3 HP)

Can a Bluetti Elite 300 run a sump pump (1/3 hp)?

Yes — the Bluetti Elite 300 runs a sump pump (1/3 hp).
The sump pump (1/3 hp) draws about 800 W running, with a 1,500 W startup surge; the Elite 300 delivers 2,400 W continuous and 4,800 W surge. Its 3,014 Wh battery runs one for about 17 h.

800 WSump Pump (1/3 HP) running

2,400 WElite 300 continuous

~17 hruntime

3,014 WhElite 300 capacity

Check the Elite 300 at Amazon → Full specs

🔗 Brand-direct affiliate link. We earn a commission when you buy through it — at no extra cost to you.

The check
Continuous: 2,400 W ≥ 800 W needed → ok
Surge: 4,800 W ≥ 1,500 W needed → ok
Runtime: 3,014 Wh × 90% ÷ 160 W avg = ~17 h

Bigger units that run it longer

Goal Zero Yeti 700

677 Wh · 1,000 W cont

768 Wh · 1,000 W cont

~4.3 h

Anker SOLIX C800

768 Wh · 1,200 W cont

~4.3 h

Goal Zero Yeti 1000X

983 Wh · 1,500 W cont

~5.5 h

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~5.5 h

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~5.8 h

EcoFlow DELTA 3 Plus

1,024 Wh · 1,800 W cont

~5.8 h

Bluetti Elite 100 V2

1,024 Wh · 1,800 W cont

~5.8 h

Common questions

Can the Bluetti Elite 300 run a sump pump (1/3 hp)?

Yes. A sump pump (1/3 hp) draws about 800 W with a 1,500 W startup surge, and the Bluetti Elite 300 delivers 2,400 W continuously with a 4,800 W surge rating — comfortably enough. On its 3,014 Wh battery it runs one for roughly 17 h (the load cycles ~20% of the time, so it lasts longer than raw watts suggest).

Sources: Sump Pump (1/3 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); Elite 300 specs — manufacturer published specifications (compiled 2026-08-10; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.