PowerFitsize it right · don't overpay

DELTA Pro 3 › runs › CPAP with Heated Humidifier

Can an EcoFlow DELTA Pro 3 run a cpap with heated humidifier?

Yes — the EcoFlow DELTA Pro 3 runs a cpap with heated humidifier.
The cpap with heated humidifier draws about 60 W running, with a 95 W startup surge; the DELTA Pro 3 delivers 4,000 W continuous and 8,000 W surge. Its 4,096 Wh battery runs one for about 77 h.
60 WCPAP with Heated Humidifier running
4,000 WDELTA Pro 3 continuous
~77 hruntime
4,096 WhDELTA Pro 3 capacity
🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.
The check
Continuous: 4,000 W ≥ 60 W needed → ok
Surge: 8,000 W ≥ 95 W needed → ok
Runtime: 4,096 Wh × 90% ÷ 48 W avg = ~77 h

Bigger units that run it longer

Goal Zero Yeti 200X
187 Wh · 120 W cont
~3.5 h
Jackery Explorer 240 v2
256 Wh · 300 W cont
~4.8 h
EcoFlow RIVER 2
256 Wh · 300 W cont
~4.8 h
Bluetti EB3A
268 Wh · 600 W cont
~5.0 h
Jackery Explorer 300 Plus
288 Wh · 300 W cont
~5.4 h
Anker SOLIX C300
288 Wh · 300 W cont
~5.4 h
Goal Zero Yeti 500X
505 Wh · 300 W cont
~9.5 h
EcoFlow RIVER 2 Max
512 Wh · 500 W cont
~9.6 h
Jackery Explorer 500
518 Wh · 500 W cont
~9.7 h

Common questions

Can the EcoFlow DELTA Pro 3 run a cpap with heated humidifier?

Yes. A cpap with heated humidifier draws about 60 W with a 95 W startup surge, and the EcoFlow DELTA Pro 3 delivers 4,000 W continuously with a 8,000 W surge rating — comfortably enough. On its 4,096 Wh battery it runs one for roughly 77 h (the load cycles ~80% of the time, so it lasts longer than raw watts suggest).

Sources: CPAP with Heated Humidifier wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); DELTA Pro 3 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.