DELTA 2 Max › runs › Microwave (1000 W cooking)

Can an EcoFlow DELTA 2 Max run a microwave (1000 w cooking)?

Yes — the EcoFlow DELTA 2 Max runs a microwave (1000 w cooking).
The microwave (1000 w cooking) draws about 1,200 W (a steady resistive load); the DELTA 2 Max delivers 2,400 W continuous and 3,400 W surge. Its 2,048 Wh battery runs one for about 1.5 h.

1,200 WMicrowave (1000 W cooking) running

2,400 WDELTA 2 Max continuous

~1.5 hruntime

2,048 WhDELTA 2 Max capacity

Check the DELTA 2 Max at EcoFlow → Full specs

🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.

The check
Continuous: 2,400 W ≥ 1,200 W needed → ok
Surge: 3,400 W ≥ 1,200 W needed → ok
Runtime: 2,048 Wh × 90% ÷ 1,200 W avg = ~1.5 h

Bigger units that run it longer

Anker SOLIX C800

768 Wh · 1,200 W cont

~0.6 h

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~0.7 h

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~0.8 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~0.8 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~0.8 h

Bluetti AC180

1,152 Wh · 1,800 W cont

~0.9 h

Jackery Explorer 1000 Plus

1,264 Wh · 2,000 W cont

~0.9 h

Goal Zero Yeti 1500X

1,516 Wh · 2,000 W cont

~1.1 h

Jackery Explorer 2000 Plus

2,042 Wh · 3,000 W cont

~1.5 h

Common questions

Can the EcoFlow DELTA 2 Max run a microwave (1000 w cooking)?

Yes. A microwave (1000 w cooking) draws about 1,200 W, and the EcoFlow DELTA 2 Max delivers 2,400 W continuously with a 3,400 W surge rating — comfortably enough. On its 2,048 Wh battery it runs one for roughly 1.5 h.

Sources: Microwave (1000 W cooking) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); DELTA 2 Max specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.