DELTA 2 › runs › Sump Pump (1/2 HP)

Can an EcoFlow DELTA 2 run a sump pump (1/2 hp)?

Yes — the EcoFlow DELTA 2 runs a sump pump (1/2 hp).
The sump pump (1/2 hp) draws about 1,050 W running, with a 2,150 W startup surge; the DELTA 2 delivers 1,800 W continuous and 2,700 W surge. Its 1,024 Wh battery runs one for about 4.4 h.

1,050 WSump Pump (1/2 HP) running

1,800 WDELTA 2 continuous

~4.4 hruntime

1,024 WhDELTA 2 capacity

Check the DELTA 2 at EcoFlow → Full specs

🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.

The check
Continuous: 1,800 W ≥ 1,050 W needed → ok
Surge: 2,700 W ≥ 2,150 W needed → ok
Runtime: 1,024 Wh × 90% ÷ 210 W avg = ~4.4 h

Bigger units that run it longer

Goal Zero Yeti 1000 Core

983 Wh · 1,200 W cont

~4.2 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~4.5 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~4.6 h

Bluetti AC180

1,152 Wh · 1,800 W cont

~4.9 h

Jackery Explorer 1000 Plus

1,264 Wh · 2,000 W cont

~5.4 h

Goal Zero Yeti 1500X

1,516 Wh · 2,000 W cont

~6.5 h

Jackery Explorer 2000 Plus

2,042 Wh · 3,000 W cont

~8.8 h

EcoFlow DELTA 2 Max

2,048 Wh · 2,400 W cont

~8.8 h

Bluetti AC200L

2,048 Wh · 2,400 W cont

~8.8 h

Common questions

Can the EcoFlow DELTA 2 run a sump pump (1/2 hp)?

Yes. A sump pump (1/2 hp) draws about 1,050 W with a 2,150 W startup surge, and the EcoFlow DELTA 2 delivers 1,800 W continuously with a 2,700 W surge rating — comfortably enough. On its 1,024 Wh battery it runs one for roughly 4.4 h (the load cycles ~20% of the time, so it lasts longer than raw watts suggest).

Sources: Sump Pump (1/2 HP) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); DELTA 2 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.