PowerFitsize it right · don't overpay

DELTA 2 › runs › CPAP with Heated Humidifier

Can an EcoFlow DELTA 2 run a cpap with heated humidifier?

Yes — the EcoFlow DELTA 2 runs a cpap with heated humidifier.
The cpap with heated humidifier draws about 60 W running, with a 95 W startup surge; the DELTA 2 delivers 1,800 W continuous and 2,700 W surge. Its 1,024 Wh battery runs one for about 19 h.
60 WCPAP with Heated Humidifier running
1,800 WDELTA 2 continuous
~19 hruntime
1,024 WhDELTA 2 capacity
🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.
The check
Continuous: 1,800 W ≥ 60 W needed → ok
Surge: 2,700 W ≥ 95 W needed → ok
Runtime: 1,024 Wh × 90% ÷ 48 W avg = ~19 h

Bigger units that run it longer

Goal Zero Yeti 200X
187 Wh · 120 W cont
~3.5 h
Jackery Explorer 240 v2
256 Wh · 300 W cont
~4.8 h
EcoFlow RIVER 2
256 Wh · 300 W cont
~4.8 h
Bluetti EB3A
268 Wh · 600 W cont
~5.0 h
Jackery Explorer 300 Plus
288 Wh · 300 W cont
~5.4 h
Anker SOLIX C300
288 Wh · 300 W cont
~5.4 h
Goal Zero Yeti 500X
505 Wh · 300 W cont
~9.5 h
EcoFlow RIVER 2 Max
512 Wh · 500 W cont
~9.6 h
Jackery Explorer 500
518 Wh · 500 W cont
~9.7 h

Common questions

Can the EcoFlow DELTA 2 run a cpap with heated humidifier?

Yes. A cpap with heated humidifier draws about 60 W with a 95 W startup surge, and the EcoFlow DELTA 2 delivers 1,800 W continuously with a 2,700 W surge rating — comfortably enough. On its 1,024 Wh battery it runs one for roughly 19 h (the load cycles ~80% of the time, so it lasts longer than raw watts suggest).

Sources: CPAP with Heated Humidifier wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); DELTA 2 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.