AC300 + B300 › runs › Space Heater (1500 W)

Can a Bluetti AC300 + B300 run a space heater (1500 w)?

Yes — the Bluetti AC300 + B300 runs a space heater (1500 w).
The space heater (1500 w) draws about 1,500 W (a steady resistive load); the AC300 + B300 delivers 3,000 W continuous and 6,000 W surge. Its 3,072 Wh battery runs one for about 1.8 h.

1,500 WSpace Heater (1500 W) running

3,000 WAC300 + B300 continuous

~1.8 hruntime

3,072 WhAC300 + B300 capacity

Check the AC300 + B300 at Bluetti → Full specs

🔗 Brand-direct affiliate link. It will earn a commission once the program is approved — at no extra cost to you.

The check
Continuous: 3,000 W ≥ 1,500 W needed → ok
Surge: 6,000 W ≥ 1,500 W needed → ok
Runtime: 3,072 Wh × 90% ÷ 1,500 W avg = ~1.8 h

Bigger units that run it longer

EcoFlow DELTA 2

1,024 Wh · 1,800 W cont

~0.6 h

Anker SOLIX C1000

1,056 Wh · 1,800 W cont

~0.6 h

Jackery Explorer 1000 v2

1,070 Wh · 1,500 W cont

~0.6 h

Bluetti AC180

1,152 Wh · 1,800 W cont

~0.7 h

Jackery Explorer 1000 Plus

1,264 Wh · 2,000 W cont

~0.8 h

Goal Zero Yeti 1500X

1,516 Wh · 2,000 W cont

~0.9 h

Jackery Explorer 2000 Plus

2,042 Wh · 3,000 W cont

~1.2 h

EcoFlow DELTA 2 Max

2,048 Wh · 2,400 W cont

~1.2 h

Bluetti AC200L

2,048 Wh · 2,400 W cont

~1.2 h

Common questions

Can the Bluetti AC300 + B300 run a space heater (1500 w)?

Yes. A space heater (1500 w) draws about 1,500 W, and the Bluetti AC300 + B300 delivers 3,000 W continuously with a 6,000 W surge rating — comfortably enough. On its 3,072 Wh battery it runs one for roughly 1.8 h.

Sources: Space Heater (1500 W) wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); AC300 + B300 specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.