PowerFitsize it right · don't overpay

F3000 › runs › CPAP with Heated Humidifier

Can an Anker SOLIX F3000 run a cpap with heated humidifier?

Yes — the Anker SOLIX F3000 runs a cpap with heated humidifier.
The cpap with heated humidifier draws about 60 W running, with a 95 W startup surge; the F3000 delivers 3,600 W continuous and 7,200 W surge. Its 3,072 Wh battery runs one for about 58 h.
60 WCPAP with Heated Humidifier running
3,600 WF3000 continuous
~58 hruntime
3,072 WhF3000 capacity
Check the F3000 at Amazon → Full specs
🔗 Brand-direct affiliate link. We earn a commission when you buy through it — at no extra cost to you.
The check
Continuous: 3,600 W ≥ 60 W needed → ok
Surge: 7,200 W ≥ 95 W needed → ok
Runtime: 3,072 Wh × 90% ÷ 48 W avg = ~58 h

Bigger units that run it longer

Jackery Explorer 100 Plus
99 Wh · 128 W cont
~1.9 h
Goal Zero Yeti 200X
187 Wh · 120 W cont
~3.5 h
EcoFlow RIVER 3
245 Wh · 300 W cont
~4.6 h
Jackery Explorer 240 v2
256 Wh · 300 W cont
~4.8 h
EcoFlow RIVER 2
256 Wh · 300 W cont
~4.8 h
Bluetti EB3A
268 Wh · 600 W cont
~5.0 h
EcoFlow RIVER 3 Plus
286 Wh · 600 W cont
~5.4 h
Jackery Explorer 300 Plus
288 Wh · 300 W cont
~5.4 h
Bluetti Elite 30 V2
288 Wh · 600 W cont
~5.4 h

Common questions

Can the Anker SOLIX F3000 run a cpap with heated humidifier?

Yes. A cpap with heated humidifier draws about 60 W with a 95 W startup surge, and the Anker SOLIX F3000 delivers 3,600 W continuously with a 7,200 W surge rating — comfortably enough. On its 3,072 Wh battery it runs one for roughly 58 h (the load cycles ~80% of the time, so it lasts longer than raw watts suggest).

Sources: CPAP with Heated Humidifier wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); F3000 specs — manufacturer published specifications (compiled 2026-10-05; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.