PowerFitsize it right · don't overpay

F1200 (PowerHouse 757) › runs › Chest Freezer

Can an Anker SOLIX F1200 (PowerHouse 757) run a chest freezer?

Yes — the Anker SOLIX F1200 (PowerHouse 757) runs a chest freezer.
The chest freezer draws about 100 W running, with a 1,000 W startup surge; the F1200 (PowerHouse 757) delivers 1,500 W continuous and 1,800 W surge. Its 1,229 Wh battery runs one for about 32 h.
100 WChest Freezer running
1,500 WF1200 (PowerHouse 757) continuous
~32 hruntime
1,229 WhF1200 (PowerHouse 757) capacity
🔗 Brand-direct affiliate link. We earn a commission when you buy through it — at no extra cost to you.
The check
Continuous: 1,500 W ≥ 100 W needed → ok
Surge: 1,800 W ≥ 1,000 W needed → ok
Runtime: 1,229 Wh × 90% ÷ 35 W avg = ~32 h

Bigger units that run it longer

Bluetti EB3A
268 Wh · 600 W cont
~6.9 h
EcoFlow RIVER 3 Plus
286 Wh · 600 W cont
~7.4 h
Bluetti AC60
403 Wh · 600 W cont
~10 h
Bluetti AC50B
448 Wh · 700 W cont
~12 h
Goal Zero Yeti 500X
505 Wh · 300 W cont
~13 h
EcoFlow RIVER 2 Max
512 Wh · 500 W cont
~13 h
Jackery Explorer 500
518 Wh · 500 W cont
~13 h
Goal Zero Yeti 700
677 Wh · 1,000 W cont
~17 h
Bluetti EB70S
716 Wh · 800 W cont
~18 h

Common questions

Can the Anker SOLIX F1200 (PowerHouse 757) run a chest freezer?

Yes. A chest freezer draws about 100 W with a 1,000 W startup surge, and the Anker SOLIX F1200 (PowerHouse 757) delivers 1,500 W continuously with a 1,800 W surge rating — comfortably enough. On its 1,229 Wh battery it runs one for roughly 32 h (the load cycles ~35% of the time, so it lasts longer than raw watts suggest).

Sources: Chest Freezer wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); F1200 (PowerHouse 757) specs — manufacturer published specifications (compiled 2026-08-10; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.