Appliances › Heating & Cooling
What size power station runs a pellet stove?
Auger + blower + igniter; the igniter spikes draw on startup, then it settles low.
Need to run it alongside other things? Add it to the full sizing tool with the rest of your load.
What size you need for 8.0 h
Running watts (everything on at once) = 300 W
Surge watts (worst single startup + the rest running) = 800 W
Average draw (cyclic loads counted by their duty cycle) = 180 W
Watt-hours = 180 W × 8.0 h ÷ 90% usable reserve = 1,600 Wh
Can a specific unit run a pellet stove?
29 of the units we track deliver enough watts to run a pellet stove. Check a specific one for the runtime and the full verdict:
Common questions
What size power station do I need to run a pellet stove?
A pellet stove draws about 300 W running, with a startup surge near 800 W. So you want a unit with at least 300 W continuous output and 800 W+ surge. For 8.0 h of runtime that's roughly 1,600 Wh of capacity — the Jackery Explorer 2000 Plus is the smallest unit that clears all of it.
How many watts does a pellet stove use?
About 300 W while running, spiking to roughly 800 W on startup. It only draws power about 60% of the time, so over an outage its energy use is well below 300 W × the hours — which is why a modest battery lasts longer than you'd expect.
Sources: Pellet Stove wattage — Standard appliance-wattage / generator-sizing charts (representative values; verify your nameplate); station specs — manufacturer published specifications (compiled 2026-06-15; approximate). Informational only — a computed sizing estimate from published appliance-wattage charts and manufacturer station specs. It is not an electrical guarantee. For hardwired or whole-home backup, transfer switches, or any permanent install, consult a licensed electrician.